A non-diaphragm type small shock tube for application to a molecular beam source

Parent resource - Micro Shock Tubes

DOI - 10.1063/1.4813276
Journal Name - Review of Scientific Instruments
Publisher Name - AIP Publishing
Document Type - journal-article

Paper Abstract- A non-diaphragm type small shock tube was developed for application to a molecular beam source, which can generate beams in the energy range from 1 to several electron volts and beams containing dissociated species such as atomic oxygen. Since repetitive high-frequency operation is indispensable for rapid signal acquisition in beam scattering experiments, the dimensions of the shock tube were miniaturized to reduce the evacuation time between shots. The designed shock tube is 2–4 mm in diameter and can operate at 0.5 Hz. Moreover, a high shock Mach number at the tube end is required for high-energy molecular beam generation. To reduce the shock attenuation caused by the wall boundary layer, which becomes significant in small-diameter tubes, we developed a high-speed response valve employing the current-loop mechanism. The response time of this mechanism is about 100 μs, which is shorter than the rupture time of conventional diaphragms. We show that the current-loop valve generates shock waves with shorter formation distances (about 200–300 mm) than those of conventional shock tubes. In addition, the converging geometry efficiently accelerates shock wave in the small-diameter tubes. The optimal geometry of the shock tube yields shock Mach number around 7, which indicates that the translation energy of molecular beams can exceed 1 eV even in the presence of the real gas effect.